| Components |
Eight 50 mm (2 in) Full-Range |
|
| Frequency Range (-10 dB) | 80 Hz – 20 kHz | |
| Coverage Pattern |
Vertical 20° (1.5 kHz – 16 kHz, ±10°) Horizontal 150° (ave, 1 kHz – 4 kHz, ±20°) |
|
| Sensitivity (2.83V@ 1m) |
93 dB (speech mode, 2 kHz – 14 kHz) 89 dB (music mode, 300 Hz – 18 kHz) |
|
| Nominal Impedance | 8 ohms | |
|
Power Capacity (8 ohm setting) |
150W (600W peak), 2 hrs 100 W (400W peak), 100 hrs |
|
| Max SPL |
Speech mode: 115 dB cont ave (121 peak) Music mode: 111 dB cont ave (117 peak) |
|
| 70V/100V Transformer Taps | 60W, 30W, 15W, (7.5W at 70V only), and 8? thru, via switch | |
| Enclosure | Fiberglass reinforced ABS cabinet, painted aluminum grille | |
| Outdoor Capability | IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant. | |
| Colors | Black or White (-WH) | |
| Insert Points | Ten M6 insert points on back panel. | |
| Mounting | Included swivel (pan) / tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt — see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points within the range. Ten threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension. | |
| Dimensions (H x W x D) |
528 x 99 x 153 mm (20.8 x 3.9 x 6.0 in) |
|
| Net Weight | 4.1 kg (9.0 lb) | |
| Included Accessories | Swivel (pan) / tilt wall bracket | |
| Optional Accessories |
MTC-PC2 terminal panel cover MTC-CBT-FM1 flush-mount low-profile wall-mount bracket MTC-CBT-SMB1 Stand-Mount Bracket for use with 35 mm speaker stand |
