Theta Digital Generation VIII Series 2
|
Main digital input board inputs |
6: 3 coaxial (2 RCA and 1 BNC), 1 AES/EBU (XLR), 2 optical (1 TosLink, 1 open for optional AT&T). |
Analog Input Section
|
Inputs |
1 stereo pair on single-ended RCA jacks, 1 stereo pair on balanced XLR jacks. |
|
Maximum Input Level |
Single-Ended: DC to 10VRMS. |
|
Input Impedance |
10 KW. |
|
Frequency response |
DC - 20KHz, ±.2dB |
|
THD+Noise |
<0.0005% @3VRMS in and out, balanced. |
|
Dynamic Range |
124dB ref 18VRMS Bal |
|
Signal to Noise Ratio |
124dB ref 18VRMS Bal |
All DSP processing is 24bit with 56 bit accumulator.
2 balanced XLR (L/R) and 2 Single-Ended RCA jacks.
|
Output Impedance |
25 Ohms. |
|
Maximum Output Level |
18 Vrms balanced (6.4VRMS balanced if Fixed Volume option installed). |
|
Frequency Response |
20 Hz-20 kHz, ± 0.01 dB, Ref. 1KHz. |
|
THD+Noise |
Less than 0.0007% (Digital), 0.0005% (Analog) @ 1KHz, at 3V output level. |
|
Dynamic Range |
>120dB minimum, 20KHz bandwidth, Ref. 1KHZ, A-weighted. |
|
Signal to Noise Ratio |
>120dB typical, idle channel, A-weighted. |
|
Crosstalk |
>140dB. |
Single-Ended Output Specifications
|
Output Impedance |
12 Ohms |
|
Maximum Output Level |
9 Vrms (3.2 VRMS if Fixed Volume option installed). |
|
Frequency Response |
20 Hz-20 kHz, ± 0.01 dB, Ref. 1KHz. |
|
THD+Noise |
Less than 0.0015% (Digital and Analog) @ 1KHz, at 3V output level. |
|
Dynamic Range |
115dB minimum, 20KHz bandwidth, Ref. 1KHZ, A-weighted. |
|
Signal to Noise Ratio |
115 typical, idle channel, A-weighted. |
|
Crosstalk |
130dB. |
24-bit Ladder (8x oversampling). 2 DACs per channel for true differential operation.
Theta proprietary switched resistor network in the analog domain.
8x oversampling Theta proprietary FIR filter running on Motorola 56362 DSP.
|
RS232 |
Complete ability to control and read status of every operational parameter of unit. |
|
IR Receiver |
3.5mm stereo phone jack (rear panel), unmodulated |
|
IR Receiver |
Front panel IR window for hand-held remote control. |
|
Remote Trigger |
One 3.5mm mono phone jack: +12VDC triggered (Can be set to Pulse or Continuous DC), pulse time variable from 50 to 250 mSec. Trigger jack can be set as an input (receiver) or output (transmitter). |
|
External Volume Data |
Receives digital volume information from Theta Casablanca. |
Miscellaneous
|
Power Requirements |
117 VAC, 50-60 Hz, 50 watts maximum, with all options installed. Fuse @ 100 & 110V = 630mA, Fuse @ 220V = 3/8A. |
|
Dimensions |
17 5/8" W x 5" H x 17 3/4" D (448 x 127 x 451 mm) |
|
Weight |
29 Lbs (10.8 Kg) Stand alone, 35 Lbs (13.1 Kg) Boxed with accessories |
|
Environment |
Operating Temperature: 32° to 95° F (0° to 35° C) |
|
Remote Control |
1 hand-held, battery powered control unit uses 2 AAA batteries. |
