TriangleArt TA 260 S
Each of the TA-260S power amplifier is handcrafted with the use of highest quality parts and components. The audio grade Toroidal transformer is custom wound according to our specifications. Even the heavy-duty special designed heat sinks are custom made in order to meet our standards.
TA-260S
Advance and sophisticated Class AB design with high output performance.Input gain control knob left and right channel.
24 carefully selected and matched MOSFET output transistors of highest quality.
Current mirror input for more stable output throughout entire dynamic range
Custom wound audio grade toroidal transformer with separate windings for
left and right channel.
Custom made heavy-duty heat sinks with special thick rib design ensure a lower operating temperature.
Sophisticated protective circuit ensures highest operational safety for the amplifier and the connected loudspeakers.
Integrated power curcuit with time-delay relay to eliminate turn-on thump.
Advance layout and wiring techniques guarantee a hum free operation.
Switchable balanced (XLR) and single-ended (RCA) inputs.
Full metal housing for optimum shielding.
Made in USA.
|
Specifications
|
|
| Rated Output Power: |
250 Watts RMS at 8 Ohms 500 Watts RMS at 4 Ohms |
| Frequency Response: | +/- 0.1 dB from 10 Hz to 50 kHz |
| Signal-to-Noise Ratio: | 110 dB |
| Total Harmonic Distortion (THD): | <0.014% |
| Gain: | 28 dB |
| Input Impedance: |
35K Ohms (single-ended) 50K Ohms (balanced) |
| Input Sensitivity: | 1.75 V RMS |
| Output Voltage: | 50 V RMS |
| Damping Factor: | 250, referred to 8 ohms |
| Power Consumption: | 700 watts continuous |
| Inputs: |
2 balanced via XLR connector (1 per channel) 2 single-ended via RCA connector (1 per channel) |
| Outputs: | 2 pairs high quality Mundorf MConnect binding posts (1 pair per channel) |
| Operating Voltage: | 100V, 120V, 220V, 230V or 240V at 50 or 60 Hz |
| Dimensions: | 19 in. W x 9.25 in. H x 23 in. D |
| Weight: | 128 lbs. |
| Warranty: | 2 Years Parts and Labor |
